Sanyo PLC-XK3010 - Manual (Page 25)

5
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables
you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select
the input source. See pages 7, 36-37 for details.
COMPUTER 1/2, VIDEO, S-VIDEO and
COMPONENT buttons
FREEZE button
Display the input source information: Input, H-sync
freq., V-sync freq., Screen, Language, Lamp status,
Lamp counter, Power management, Key lock, PIN
code lock, Remote control and SERIAL NO. (p.57).
INFO. button
Press the D.ZOOM buttons on the remote control to
enter to the Digital zoom +/– mode. See page 35 for
details.
D.ZOOM buttons
Remote Control
 Note:
See the next page for the description of
other buttons.
LAMP button
COMPUTER 1/2
buttons
High .............. Brighter than the Normal mode.
Normal .......... Normal brightness
Eco ............... Lower brightness reduces the lamp
power consumption and extends the
lamp life.
Press the LAMP button on the remote control to select
the lamp mode for changing the brightness on the
screen.
Press the FREEZE button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
FREEZE button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
FREEZE
button
D.ZOOM
buttons
VIDEO
button
LAMP button
INFO. button
S-VIDEO
button
COMPONENT
button