Sanyo PLC-XK3010 - Manual (Page 39)

39
Video Input
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection
Image 4
Blackboard (Green)
Standard
Remote Control
IMAGE button
Select the desired image mode among Dynamic,
Standard, Real, Cinema, Blackboard (Green),
Colorboard, Image 1, Image 2, Image 3 and Image 4
by pressing the IMAGE button on the remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard (Green)
Image 1–4
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Dynamic
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in the
Image Adjust Menu (see page 41).
1
2
Menu Operation
Colorboard
Colorboard
At the time of simple projection on the colored wall,
you can get the close color image to the color image
projected on a white screen by selecting the similar color
to the wall color from the preset four colors.
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
select and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired
item and then press the SELECT button.
Picture mode adjusted with fine tone.
Cinema
Cinema