Setting – Sanyo PLC-XK3010 User Manual

Page 53

Setting

Key lock

Security (Key lock and PIN code lock)

PIN code lock

This function locks the top control and remote control

buttons to prevent operation by unauthorized persons.
Select

Key lock and then press the SELECT button,

and select the desired item by pressing the Point ▲▼

buttons.

..... Unlocked.

..... Lock the operation of the top control.

To unlock, use the remote control.

..... Lock the operation of the remote

control. To unlock, use the top

control.

If the top control accidentally becomes locked and

you do not have the remote control nearby or there

is something wrong with your remote control, contact

the dealer where you purchased the projector or the

service center.

This function allows you to use the Key lock and PIN

code lock function to set the security for the projector

operation.

This function prevents the projector from being

operated by unauthorized persons and provides the

following setting options for security.

Off ........... Unlocked.

On 1......... Enter the PIN code every time turning on

the projector.

On 2......... Enter the PIN code to operate the

projector once the power cord is

disconnected; as long as the AC power

cord is connected, the projector can be

operated without a PIN code.

Whenever you change the PIN code lock setting or

the PIN code (the four-digit number), you are required

to enter the PIN code. The “134” is set as the initial

PIN code at the factory.

If you want to change the PIN code lock setting, press

the SELECT button and the PIN code dialog box

appears.

When the projector is locked with the PIN code, the

Security icon appears on the guide.

PIN code lock

Setting

When the projector is locked with

the PIN code, the Security icon

appears on the guide.