beautypg.com

Sound adjustment, Basic operation – Sanyo PLC-XK3010 User Manual

Page 24

background image

4

Basic Operation

Sound Adjustment

1

2

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select

Sound.

Press the Point ► or the SELECT button to access

the submenu items.

Press the VOLUME+/– buttons on the top control or on

the remote control to adjust the volume. The volume

dialog box appears on the screen for a few seconds.

Press the MUTE button on the remote control to select

On to temporarily turn off the sound. To turn the sound

back on, press the MUTE button again to select

Off or

press the VOLUME +/– buttons. The Mute function is

also effective for the AUDIO OUT jack.

Press the SELECT button to switch the mute function

On/

Off. When the sound is turned off, On is displayed. Press

the VOLUME +/– buttons again or adjust MIC gain’s

volume to turn the sound back on.

Use the Point ▲▼ buttons to select the desired

submenu item and press the SELECT button to

access the selected item.

Volume

Volume

Mute

Press the Point ► button to turn up the volume; Press

the Point ◄ button to turn down the volume.

Mute

Menu Operation

Sound Menu

Volume Dialog Box

Remote Control

VOLUME + button

VOLUME - button

MUTE button

Top Control

Approximate level of

the volume.

Press the MUTE button to set the Mute

function

On or Off. The dialog box

disappears after 4 seconds.

Direct Operation

VOLUME +/- buttons

Use the Point ▲▼ buttons to switch the MIC function

On/Off, and then press the SELECT button. When On is

selected, the synthesis volume (MIC and RCA) is output.

MIC

MIC gain

Press the Point ► button to turn up the MIC mixing gain;

Press the Point ◄ button to turn down the MIC mixing

gain.

MIC Setup

AUDIO IN

MIC Off

MIC On

RCA L/R terminal

Mini jack

Video audio input

PC audio input

Video or PC audio input

MIC input

AUDIO INPUT SELECTION (see pages 14-15)

Note:

• When

Off is selected in MIC function, the

MIC gain and Standby MIC out functions are

not available.

• Only the Standby mode is set to

Network,

Standby MIC out can be selected.

• If the MIC function is turned on when

connecting PC audio to the AUDIO IN (a mini

jack), loud sound may be output suddenly

depending on the setting value of MIC gain.

Standby MIC out

When setting the Standby MIC out function to

On and

in Standby mode status, only MIC input volume can be

output.