beautypg.com

Garp timer, Garp timer -218 – SMC Networks SMC TigerStack IV SMC6224M User Manual

Page 466

background image

C

OMMAND

L

INE

I

NTERFACE

4-218

Example

garp timer

This command sets the values for the join, leave and leaveall timers. Use
the no form to restore the timers’ default values.

Syntax

garp timer {join | leave | leaveall} timer_value
no garp timer {join | leave | leaveall}

• {join | leave | leaveall} - Which timer to set.
timer_value - Value of timer.

Ranges:
join: 20-1000 centiseconds
leave: 60-3000 centiseconds
leaveall: 500-18000 centiseconds

Default Setting

• join: 20 centiseconds
• leave: 60 centiseconds
• leaveall: 1000 centiseconds

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• Group Address Registration Protocol is used by GVRP and GMRP to

register or deregister client attributes for client services within a
bridged LAN. The default values for the GARP timers are
independent of the media access method or data rate. These values
should not be changed unless you are experiencing difficulties with
GMRP or GVRP registration/deregistration.

• Timer values are applied to GVRP for all the ports on all VLANs.

Console#show gvrp configuration ethernet 1/6
Eth 1/ 6:
GVRP configuration: Enabled
Console#

This manual is related to the following products: