SMC Networks SMC TigerStack IV SMC6224M - Manual (Page 261)

C
OMMAND
G
ROUPS
4-13
The access mode shown in the following tables is indicated by these
abbreviations:
NE (Normal Exec)
PE (Privileged Exec)
GC (Global Configuration)
ACL (Access Control List Configuration)
IC (Interface Configuration)
LC (Line Configuration)
VC (VLAN Database Configuration)
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time 4-175
Spanning Tree Configures Spanning Tree settings for the switch 4-180
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs 4-195
GVRP and
Bridge Extension Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for the
bridge extension MIB 4-215
Priority Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, IP precedence, and DSCP 4-220
Multicast Filtering Configures IGMP multicast filtering, query
parameters, and specifies ports attached to a
multicast router 4-236
IP Interface Configures IP address for the switch 4-247
Table 4-4 Command Groups (Continued)
Command Group Description Page