SMC Networks SMC TigerStack IV SMC6224M - Manual (Page 403)

I
NTERFACE
C
OMMANDS
4-155
Table 4-41 Interfaces Switchport Statistics
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled;
if enabled it also shows the threshold level (page 4-149).
Lacp status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-164).
Ingress/Egress rate
limit Shows if rate limiting is enabled, and the current rate limit.
(page 4-159).
VLAN membership
mode Indicates membership mode as Trunk or Hybrid (page
4-199).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-201).
Acceptable frame
type Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-200).
Native VLAN Indicates the default Port VLAN ID (page 4-202).
Priority for
untagged traffic Indicates the default priority for untagged frames (page
4-220).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-217).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 4-203).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via
GVRP (page 4-204).
Private VLAN
mode Shows the private VLAN mode as host, promiscuous, or
none (4-211).
Private VLAN
host-association Shows the secondary (or community) VLAN with which this
port is associated (4-212).
Private VLAN
mapping Shows the primary VLAN mapping for a promiscuous port
(4-213).