SMC Networks SMC TigerStack IV SMC6224M - Manual (Page 339)

F
LASH
/F
ILE
C
OMMANDS
4-91
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered
up.
Syntax
whichboot [unit]
unit - Stack unit.
(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Table 4-26 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir 1:
------------------------------------- -------------- ------- -----------
Unit2:
D2218 Boot-Rom image Y 214000
V2260-S Operation Code Y 1748676
V2264-J Operation Code N 1754316
Factory_Default_Config.cfg Config File Y 5013
---------------------------------------------------------------------------
Total free space: 3407872
Console#