Spanning tree commands, Spanning tree commands -180, Table 4-50 spanning tree commands -180 – SMC Networks SMC TigerStack IV SMC6224M User Manual
Page 428
C
OMMAND
L
INE
I
NTERFACE
4-180
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Algorithm (STA) globally for the switch, and commands that configure
STA for the selected interface.
Table 4-50 Spanning Tree Commands
Command
Function
Mode
Page
spanning-tree
Enables the spanning tree protocol
GC
spanning-tree mode Configures STP or RSTP
GC
spanning-tree
forward-time
Configures the spanning tree bridge
forward time
GC
spanning-tree
hello-time
Configures the spanning tree bridge hello
time
GC
spanning-tree
max-age
Configures the spanning tree bridge
maximum age
GC
spanning-tree
priority
Configures the spanning tree bridge
priority
GC
spanning-tree
path-cost method
Configures the path cost method for
RSTP
GC
spanning-tree
transmission-limit
Configures the transmission limit for
RSTP
GC
spanning-tree
spanning-disabled
Disables spanning tree for an interface
IC
spanning-tree cost Configures the spanning tree path cost of
an interface
IC
spanning-tree
port-priority
Configures the spanning tree priority of
an interface
IC
spanning-tree
edge-port
Enables fast forwarding for edge ports
IC
spanning-tree
portfast
Sets an interface to fast forwarding
IC
spanning-tree
link-type
Configures the link type for RSTP
IC