Show log, Show log -65 – SMC Networks SMC TigerStack IV SMC6224M User Manual
Page 313
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-65
Related Commands
show log
This command displays the system and event messages stored in memory.
Syntax
show log {flash | ram} [login] [tail]
- flash - Event history stored in flash memory (i.e., permanent
memory).
- ram - Event history stored in temporary RAM (i.e., memory
flushed on power reset).
- tail - Shows event history starting from the most recent entry.
- login - Shows the login record only.
Default Setting
None
Command Mode
Privileged Exec
Table 4-20 show logging trap - display description
Field
Description
Syslog logging
Shows if system logging has been enabled via the logging on
command.
REMOTELOG
status
Shows if remote logging has been enabled via the logging
trap command.
REMOTELOG
facility type
The facility type for remote logging of syslog messages as
specified in the logging facility command.
REMOTELOG
level type
The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
REMOTELOG
server IP address
The address of syslog servers as specified in the logging host
command.