SMC Networks SMC TigerStack IV SMC6224M - Manual (Page 287)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-39
• You can delete an address range just by specifying the start address, or
by specifying both the start address and end address.
Example
This example restricts management access to the indicated addresses.
show management
This command displays the client IP addresses that are allowed
management access to the switch through various protocols.
Syntax
show management {all-client | http-client | snmp-client |
telnet-client}
- all-client - Adds IP address(es) to the SNMP, web and Telnet
groups.
- http-client - Adds IP address(es) to the web group.
- snmp-client - Adds IP address(es) to the SNMP group.
- telnet-client - Adds IP address(es) to the Telnet group.
Command Mode
Privileged Exec
Console(config)#management all-client 192.168.1.19
Console(config)#management all-client 192.168.1.25 192.168.1.30
Console(config)#