Samsung Vibrant SGH-t959 - Manual (Page 134)

130
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
ᮣ From the Home screen, touch ➔ Settings ➔ Wireless
and networks ➔ Bluetooth settings and touch Bluetooth to
turn it on.
Note: Bluetooth must be enabled prior to use.
Activating the Device Name
1. Activate Bluetooth. For more information, refer to
“Activating Bluetooth” on page 130.
2. From the Home screen, touch ➔ Settings ➔ Wireless
and networks ➔ Bluetooth settings and touch Device name.
The assigned device name displays.
3. Press to erase the current device name and enter a
new name for this device using the keyboard.
4. Press OK to confirm your setting.
Activating Visibility
ᮣ From the Home screen, touch ➔ Settings ➔ Wireless
and networks ➔ Bluetooth settings and touch Visible.
The phone is now activated for discovery for 119 seconds
so you can pair with another device. After 119 seconds the
phone becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. From the Home screen, touch ➔ Settings ➔ Wireless
and networks ➔ Bluetooth settings and touch Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
2. Touch a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
touch OK.