Siemens SIMATIC INDUSTRIAL PC PCIL43 - Manual (Page 86)

Appendix
A.4 Retrofitting instructions
SIMATIC Rack PC IL 43
A-6
Operating Instructions, Edition 09/2005, A5E00432875-01
A.4
A.4
Retrofitting instructions
Below you will find a description of the permissible configuration versions of the
Rack PC IL 43 with drives and processors, and the resultant operational conditions.
Approved configuration versions for the temperature range 5 to 35° C
DVD-ROM or
DVD-ROM/CD-RW or
DVD-Writer or
HD in removable rack
Floppy
DVD-ROM or
DVD-ROM/CD-RW or
DVD-Writer or
HD in removable rack
DVD-ROM or DVD-ROM / CD-R
W or
DVD-W
riter or
HD in removable rack
Figure A-1 For the temperature range 5 to 35° C
Celeron and P4 processors up to 90 W can be used. The maximum permissible power loss
of expansion modules is 80 W.
A removable rack with hard disk can be installed instead of DVD drive(s).
Devices equipped with removable racks may not to be exposed to shock during operation as
described by DIN IEC 60068-2.
Approved configuration versions for the temperature range 5 to 40° C
Floppy DVD-ROM
DVD-ROM oder
HD im Wechselrahmen
DVD-ROM oder
HD im Wechselrahmen
Figure A-2 Approved configuration versions for the temperature range 5 to 40° C
Celeron and P4 processors up to 90 W can be used. The maximum permissible power loss
of expansion modules is 80 W.
A removable rack with hard disk can be installed instead of DVD drive(s).
Devices equipped with removable racks may not to be exposed to shock during operation as
described by DIN IEC 60068-2.