Siemens SIMATIC INDUSTRIAL PC PCIL43 User Manual

Page 66

Maintenance and service

11.2 Reinstalling the software

SIMATIC Rack PC IL 43

11-12

Operating Instructions, Edition 09/2005, A5E00432875-01

Note
If you are using Microsoft Windows as a professional user, you should have the following

manuals available (not supplied):

Microsoft Windows 2000 Professional Resource Kit (MSPress No 274) or

Microsoft Windows XP Professional, Technical Reference (MSPress No 934)

Microsoft Windows Server 2300, Planning Server Deployment for Windows Server 2003,

Technical Reference (MSPress No. 420)
These manuals contain special information for administrators involved in installing,

managing and integrating Windows in networks or multi-user environments.

Information for systems with RAID or RAID controllers (optional)

In systems with additional controllers that are unknown to the operating system, these

controllers must be made known to the Windows operating system.
1. During the booting phase, press the F6 key and follow the instructions on the screen.

During the installation phases that follow, you are prompted several times for a floppy

disk containing the missing drivers of the module. You can find these on the supplied

"Documentation and Drivers" CD in the Drivers\RAID\Intel directory.

2. Copy the corresponding driver to an empty floppy disk.

11.2.4

Setting up the language selection for Windows 2000 MUI

The Multilanguage User Interface (MUI) allows you to set up the Windows 2000 menus and

dialogs for additional languages.
To set the required languages for the Windows 2000 menus, dialogs and keyboard layout,

select:

Start > Settings > Control Panel > Regional Options > General tab, Setting for the current user field

and Language settings for the system field and the Keyboard layout field in the Input Locales tab.

In addition to the menu and dialog language settings, you also need to set the default

language by selecting Set Default... from the Regional Options dialog box.
The default language setting of your Windows 2000 installation is English and a US

keyboard layout. To change to another language and keyboard layout, open the Control

Panel and select:

Start > Settings > Control Panel > Regional Options >General tab, Setting for current user field and

Language settings for the system field and the Input language field in the Input Locales tab.