Siemens SIMATIC INDUSTRIAL PC PCIL43 - Manual (Page 55)

SIMATIC Rack PC IL 43
Operating Instructions, Edition 09/2005, A5E00432875-01
11-1
Maintenance and service
11
11.1
11.1
Removing and installing hardware components
11.1.1 Repairs
Carrying out repairs
Only authorized personnel are permitted to repair the device.
Warning
Unauthorized opening and improper repairs on the device may result in substantial damage
to equipment or endanger the user.
• Before you open the device, first switch it off and then disconnect the power plug.
• Install only system expansion devices designed for this computer. If you install other
expansion devices, you may damage the system or violate the safety requirements and
regulations on RF suppression. Contact your technical support team or where you
purchased your PC to find out which system expansion devices may safely be installed.
If you install or exchange system expansions and damage your device, the warranty
becomes void.
Notice
Note the EGB instructions.
Limitation of Liability
All technical specifications and licenses apply only to expansions approved by SIEMENS.
No liability can be accepted for impairment of functions caused by the use of devices and
components of other manufacturers.
Tools
All mechanical installation tasks on the device can be carried out with TORX T8, Torx T10
and TORX T15 screwdrivers as well as a side-cutter.