Siemens SIMATIC INDUSTRIAL PC PCIL43 - Manual (Page 78)

Dimensional drawings
14.2 Dimensional drawing for the use of telescopic rails
SIMATIC Rack PC IL 43
14-2
Operating Instructions, Edition 09/2005, A5E00432875-01
14.2
14.2
Dimensional drawing for the use of telescopic rails
mm
Inch
Dimensions:
Dimensions for telescopic
rails by the company Rittal
type 3659
Dimensions for telescopic
rails by the company Schroff
type 69000-122
0,1 mm
0.004 Inch
T1=Tolerance ±
0,3 mm
0.01 Inch
T2=Tolerance ±
0,5 mm
0.02 Inch
T3=Tolerance ±
1.32±T3
33.54±T3 100±T1 100±T1 100±T1
3.937±T1 3.937±T1 3.937±T1
127±T1
5±T1 209.6±T1
8.251±T1 355.6±T1
14±T1
72.6 ±
T2
2.858
± T2
88.5 ±
T2
3.484 ±
T2
Figure 14-2 Dimensional drawing for the use of telescopic rails
14.3
14.3
Dimensional drawings for the installation of expansion modules
Figure 14-3 Long PCI module, PCIe module