Samsung SHR-4081N/P - Manual (Page 82)

English English 10-46
SHR-4081N/P USER’S MANUAL
10-45
● Video Recording
! Naming
- Being connected to SHR-4081N/P in Monitoring or Search Mode, you can save
the video data in display in .dvr file format. This determines how to name .dvr
file format.
- The file name depends on camera number and serial number, set to “Camera
No. + Serial No.” or camera number, current date, and time, set to “Camera No.
+ Date”.
@ Location
- As long as you are connected to SHR-4081N/P in Monitoring or Search Mode
while recording the video data in display, this sets up a directory where .dvr file
format will be saved.
- The current default directory is “Smart Viewer Program Installed Directory
\video\dvr”.
# Recording Time
- As long as you are connected to SHR-4081N/P in Monitoring or Search Mode
while recording the video data in display, this sets up the longest recording time.
- Time setup ranges from 1 to 10 minutes. If recording exceeds the preset time at
Recording Time, recording will be automatically stopped.
● File Converting
[JPEG]
! Location
- You can convert the files saved in your PC in .dvr file format into JPEG format
files then the frames composing .dvr file format will be converted into JPEG
format files. Now, this designates a directory in which the converted JPEG files
will be saved.
- The current default directory is “Smart Viewer Program Installed Directory
\frame”.
● Sequence Time
- As long as you are connected to SHR-4081N/P in Monitoring Mode while
Screen change is dominant, this sets up Screen change Time. The scope of
setup ranges from 5 to 30seconds.
● OSD Display
- Determines if OSD shall be displayed on each channel of Smart Viewer.
- Whether you check “Enable” or not, OSD will appear or not. However, Audio
icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by
the OSD Display condition.
● Auto Connection
- Determines if Smart Viewer shall be automatically connected to SHR-4081N/P
or Site as soon as it starts running.
- If you check “Auto Connection On”, the name of SHR-4081N/P and Sites that
are currently registered in DVR/Site List will be listed as follows and if you select
one, it will be automatically connected to the selected SHR-4081N/P or Site as
soon as Smart Viewer starts running.
● Callback Connection
- Selects the port to allow the connection of Callback.
● Event Sound
- This is a menu item that is designed to set the alarming time when it receives
an event message such as an alarm, motion and/or Video loss.
● Language
- This sets a language for SmartViewer.
4081N/P
4081N/P
* *
*
*
*