Samsung SHR-4081N/P - Manual (Page 17)

English English
3
Connecting IEEE1394 Device
3-4
● Connect the IEEE1394 hard disk through the back port of SHR-4081N/P.
● You can connect up to 6 IEEE1394 armored hard disks by the Daisy-Chain
method.
● After connection, Menu - System - HDD Setup is necessary for recognition and
setup for use.
● It acts as HOT PLUG to connect or disconnect the IEEE1394 device while the
system is running.
● If you press Connect/Disconnect in Menu - System - HDD Setup, HOT PLUG will
be recognized or deleted.
SHR-4081N/P USER’S MANUAL
3-3
Note Note
See 5-8 System (HDD Setup) of User’s Manual.
Caution Caution
- Wait until the HOT PLUG connected hard disk is stabilized enough (approx. 2 seconds
per each hard disk) and click CONNECT in SHR-4081N/P MENU before use.
- Be sure to click DISCONNECT in SHR-4081N/P MENU to delete IEEE1394 Device
safely. Failure of clicking DISCONNECT may cause improper operation of IEEE1394
Device.
Caution Caution
The IEEE1394 Device hard disk shall be set to Master.
Note Note
Refer to Appendix 2 to see which HDD specifications are supplied.