Samsung SHR-4081N/P - Manual (Page 37)

English English 5-24
● Sensitivity
Determines Motion sensing sensitivity. Sensitivity grade consists of Low ➝
Medium ➝ Very High in the ascending order.
● Alarm-Out
Selects Alarm-Out scope when Motion occurs.
At this moment, this supports 5 Alarm Outs. Choose an alarm-out that you want to
synchronize with the current motion channel. Multi-choice is possible.
● Duration
Determines Alarm-Out Duration. Alarm-Out continues for the determined duration.
Off / 3sec / 5sec / 10sec / 20sec / 30sec
Video Loss Detection Setup
SHR-4081N/P USER’S MANUAL
5-23
● Video Loss State
Off : Image Loss Sensing does not operate.
On : Image Loss Sensing starts operation.
● Alarm-Out
Selects Alarm-Out scope when the current Image Loss occurs.
At this moment, this supports 5 Alarm Outs. Choose an alarm-out that you want to
synchronize with the current motion channel. Multi-choice is possible.
● Duration
Determines Alarm-Out Duration. Alarm-Out continues for the determined duration.
Off / 3sec / 5sec / 10sec / 20sec / 30sec
6
Record Schedule
You may select a time when recording starts automatically.
Setup by the weekday or time.
The default is set to “None”.
● Pressing “CH > “ copies the value of Channel 1 to all the channels.
● The horizontal axis numbered from 0 to 23 represents the time value.
The vertical axis numbered from S to H represents the day value.
(H : Holiday)
Setup by the weekday or time.
● Pressing “ALL” converts the overall setting of the selection window into
Continuous
➝ Event ➝ Both ➝ None.
● Continuous Recording
Recording starts automatically on the preset time.
Recording follows the condition established in 5-18.Record Mode of MENU.
☛
Refer to 7-3 Record Schedule of MENU.
● Event Recording
Recording starts automatically when Event occurs to Alarm/Motion Detection/Video
Loss within a designated time.
Recording follows the condition established in 5-19.Event Record Mode Setup of MENU.
☛
Refer to 7-4 Event Recording of MENU.
● Each recording mode has its unique color, Yellow for Sleeping, Blue for
Event, and Red for Sleeping/Event.
● Reserved Recording On/Off
The reserved recording will progress when it’s set to “On,” and the reserved
recording will not progress when it’s set to “Off.”