Samsung SPH-M560 - Manual (Page 49)

Ringers 43
Ringers
2. Select Ringer Settings.
3. Select Ringer Type.
4. Select Roaming.
5. Select Normal or Distinctive and press to save and exit.
Alerts
Your phone can alert you with an audible tone when you change service areas,
once a minute during a voice call, when a call has been connected, and when
turning your phone on and off. The different options available are:
•
Minute Beep : An alert tone is sounded every minute that you are
connected.
•
Service Change : An alert tone is sounded when you come in or out of your
coverage area.
•
Call Connect : An alert tone is sounded when you are initially connected.
•
Signal Fade / Call Drop : An alert tone is sounded when your phone partially
loses signal due to network conditions or leaving network coverage area.
•
Power On : An alert tone is sounded when powering on.
•
Power Off : An alert tone is sounded when powering off.
To enable or disable alert sounds:
1. Activate the main menu, highlight the Ringers menu, and press .
2. Select Ringer Settings.
3. Select Alerts.
4. Press the navigation key up or down to select the desired alert.
5. Select On or Off using the navigation key and press to save and
exit.
Key Tones
You can select the audible tones accompanying a key press. There are three
different tones available:
•
Glossy : Polyphonic tones are heard when a key is pressed.
•
DTMF : Normal, touch-tone beeps are heard when a button is pressed.
•
Voice : The number or symbol of the key is heard when you press a key.
To select a key tone:
1. Activate the main menu, highlight the Ringers menu, and press .
2. Select Ringer Settings.
m560 BMC.book Page 43 Wednesday, September 2, 2009 3:39 PM