Send text Page 33
Page 33
Voice Service 27
Voi
ce Servi
ce
displayed on the screen by pressing
on the correct number. The
phone will then dial the number.)
•
If the phone asks you, “Did You Say,” followed by an incorrect
number, say No. (If there are other alternatives, the phone will prompt
you with the next one. You can also press the navigation key up or
down to select the correct number from the Choice List, and then
press
to dial.)
3.
Alternatively, you can call a person in your Contacts by saying the
name of the person, exactly as it is entered in your Contacts. (The
phone plays the name through the earpiece and displays it on the
screen.)
If you said a name listed in your Contacts that has more than one
number associated with it, the phone displays the different locations
(e.g. Home 1, Work 1, Mobile 1, Pager 1, Fax 1, Others 1) and asks
you which one to dial. Say one of the location names and the phone
will dial the number for the location you specified.
Send Text
To compose a text message using Voice Service:
1.
Activate voice recognition. (See page 26.)
2.
Say “Send Text” followed by either a name stored in your Contacts or a
valid 7, 10 or 11 digit North American phone number.
•
If the phone asks you, “Did You Say,” followed by the correct number,
say Yes. (You can also select the correct number from those
displayed on the screen by pressing
on the correct number.)
•
If the phone asks you, "Did You Say," followed by an incorrect
number, say No. (If there are other alternatives, the phone will prompt
you with the next one. You can also press the navigation key up or
down to select the correct number from the Choice List.)
3.
Compose your text message. For more information, see "To send a text
message:" on page 45, beginning at step 6.
Send Picture
To compose Pic/Video Message using Voice Service:
1.
Activate voice recognition. (See page 26.)
2.
Say “Send Picture” followed by a name stored in your Contacts or a
valid 7, 10 or 11 digit North American phone number.
m560 BMC.book Page 27 Wednesday, September 2, 2009 3:39 PM