IBM QMS 4525 - Manual (Page 70)

Emptying Output
Bins
QMS 4525 Print System User's Guide 4-16
Emptying Output Bins
When one of the output bins becomes full,
OUTPUT BIN FULL
appears in the message display. To empty either output bin
If you do not return the bin to its operating position,
UPPER TRAY OUT or LOWER TRAY OUT
continues to display. Properly seat the bin and press the Continue
key.
™
1 See that the bin is not receiving output.
2 Place you fingers on the
bin release (under the
front edge of the bin)
and, with your thumb on
top, squeeze to release
the bin.
3 Slowly pull the bin out
until it stops.
4 Remove the output stack.
5 Slowly push the bin back until it clicks into place.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500