IBM QMS 4525 - Manual (Page 12)

About This Manual
QMS 4525 Print System User’'s Guide 1-2
About This Manual
This manual provides information on how to operate and maintain
your QMS 4525 Print System. Use the following summary, the table of
contents, and the index to locate the information you need.
Contents
„
Chapter 1 — Introduction
Introduces the QMS 4525 Print System, gives an overview of this
manual, lists the manual’s typographic conventions, and
describes the QMS 4525 documentation.
„
Chapter 2 — About the QMS 4525 Print System
Describes the notable characteristics of the QMS 4525 Print Sys-
tem; explains how to control and configure the printer via the con-
trol panel and via local and remote consoles; discusses how the
printer interacts with the application, PS Executive Series Utilities,
and QMS Document Option Commands; and describes the QMS
Crown multitasking operating system.
„ Chapter 3 — Print Media
Discusses print media, supported media sizes, and imageable
areas. Provides information on paper, feeding paper, and paper
tray configuration.
„
Chapter 4 — Daily Operations
Describes how to turn the printer on and off. Explains the dew
prevention switch, describes how to load paper in the paper trays
and how to refill the toner bin, and tells you how to use the 20-
and 40-bin sorters and the stacker/stapler.
„
Chapter 5 — Printing Your Files
Describes how to print your files from applications, and with DOC,
VMS, and UNIX commands; explains printer job spooling, feeding
paper, selecting paper trays, selecting languages and emulations,
printing duplex, printing multiple copies, collating, selecting orien-
tation, using manual feed, printing multiple page images per
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500