IBM QMS 4525 - Manual (Page 69)

Refilling Staples
4-15 Daily Operations
7 Using your right hand, push the green lever to the
right until you first feel resistance (just after the 12
o'clock position) and hold the lever there.
8 With your left hand, feed the staples along the guide
and into the stapler until staples begin to protrude
slightly.
9 Grip the protruding end of the staples with your fin-
gers or pliers.
Push the green lever all the way to the right to load the
stapler and trim off the protruding staples. Discard the
trimmed staples.
10 Reinstall the staple
roll cover carefully.
Make sure the bottom
edge snaps into the
groove in the bottom
of the roll holder.
11 Lower the stacker/stapler top cover and press down
until it clicks into place.
12 Make sure your print job staples correctly.
Print an advanced status page or another multiple page
document. The first set printed after staples are refilled
will not be stapled. The next set of copies of your print job
will be stapled.
6WDSOH5ROO&RYHU
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500