IBM QMS 4525 - Manual (Page 141)

Print Media
Specifications
B-9 Technical Specifications
„ Drafting film
„
Drafting paper
„
Preprinted paper (quick-drying and heat-proof ink)
• 1RWH7KHLQNPXVWEHKHDWUHVLVWDQWXSWRŠ)Š&IRU
VHFRQGVDQGSUHVVXUHUHVLVWDQWXSWROELQ NJFP IRU
PLOOLVHFRQGV
Do Not Use
The following media is unsupported:
„
Thin offset plates, such as PD200
„
Recycled paper
„ Vellum
Print Media Sizes and Imageable Areas
Your printer supports paper and transparencies in three sizes. Each
size has a certain imageable area, the maximum area capable of
being printed on. It is subject to both hardware limits (the physical
page size and the margins required by the printer engine) and soft-
ware constraints (the amount of memory available for the full-page
frame buffer).
Following are the supported paper types and their imageable areas:
Inches Millimeters
Paper Type Page Size Imageable
Area Page Size Imageable
Area
Letter 8.5 x 11.0 8.19 x 10.66 216 x 279 208 x 271
Legal Large 8.5 x 14.0 8.19 x 13.69 216 x 356 208 x 348
A4 8.3 x 11.7 7.95 x 11.37 210 x 297 202 x 289
Quarto 8.0 x 10.0 7.67 x 9.68 203 x 254 195 x 246
Commercial 8.3 x 10.6 7.95 x 10.31 210 x 270 202 x 262
Foolscap 8.0 x 13.0 7.67 x 12.67 203 x 330 195 x 322
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500