IBM QMS 4525 - Manual (Page 104)

Clearing Paper
Jams
QMS 4525 Print System User's Guide 6-4
appears, there is probably a paper jam somewhere in the input sec-
tion of the printer. To clear a paper jam in the paper input section
When You Have Finished
Once all jammed paper has been removed, press the Continue key
on the control panel. The printer then resumes printing, starting with
the paper not properly deposited in the standard output bin when the
jam occurred.
• 1RWH,IWKHVDPHSDSHUMDPRFFXUVRIWHQPDNHVXUH\RXDUHXVLQJDSDSHU
VL]HDQGZHLJKWWKDWLVVXSSRUWHGE\WKHSULQWHU7KHQVHHWKDWWKHSDSHULV
FRUUHFWO\VWDFNHGLQWKHSDSHULQSXWELQRUDOLJQHGLQWKHPDQXDOIHHGVORW
DQGPDNHVXUHWKHFORVXUHSODWHLVFRUUHFWO\SRVLWLRQHGDQGDOLJQHGDJDLQVW
WKHULJKWHGJHRIWKHSDSHUVWDFN
1 Open the paper compartment.
2 Check both
paper input bins
and remove any
misfed paper at
the paper feed
rollers.
3 Make sure the paper in the bin is stacked properly and that
no sheets are folded or bent.
Check that the closure plates are aligned with the stack of paper.
The closure plates should not press too tightly against the stack,
but there should not be too much play.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500