IBM QMS 4525 - Manual (Page 120)

Control Panel
Status Messages
QMS 4525 Print System User's Guide 6-20
SERVICE CALL 91
Indicates that the feed plate temperature is out of specification. Contact QMS
National Service. See appendix A, “QMS Customer Support,” for information
on how to get help.
SERVICE CALL 92
Indicates that the delivery belt temperature is out of specification. Contact
QMS National Service. See appendix A, “QMS Customer Support,” for
information on how to get help.
SERVICE CALL 93
Indicates that the TTF heater is faulty. Contact QMS National Service. See
appendix A, “QMS Customer Support,” for information on how to get help.
SERVICE CALL 94
Indicates that the feed heater is faulty. Contact QMS National Service. See
appendix A, “QMS Customer Support,” for information on how to get help.
SERVICE CALL 95
Indicates that the delivery heater is faulty. Contact QMS National Service.
See appendix A, “QMS Customer Support,” for information on how to get
help.
SERVICE CALL 120
Indicates an image transfer error. Contact QMS National Service. See
appendix A, “QMS Customer Support,” for information on how to get help.
SERVICE CALL 140
Indicates that the erase lamp failed. Contact QMS National Service. See
appendix A, “QMS Customer Support,” for information on how to get help.
SERVICE CALL 170
Indicates that an accurate upper paper level cannot be calculated. Contact
QMS National Service. See appendix A, “QMS Customer Support,” for
information on how to get help.
SERVICE CALL 171
Indicates that an accurate upper paper level cannot be calculated. Contact
QMS National Service. See appendix A, “QMS Customer Support,” for
information on how to get help.
SERVICE CALL 210
Indicates that the stacker lower tray didn’t reach the correct position. Contact
QMS National Service. See appendix A, “QMS Customer Support,” for
information on how to get help.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500