Mitel 5212 - Manual (Page 7)

5
Using Call Logging
1. Dial 333.
2. Select one of the following options:
• Press 1 (MISS) for missed calls.
• Press 2 (RCV) for received calls.
• Press 3 (DL) for dialed calls.
• Press 4 (CLR) to clear all entries.
3. Press (Up) or (Down) to scroll through the entries.
Viewing Messages
With the handset on-hook, press (Message). If there is more than one
message, you can repeatedly press (Message) to scroll through the
messages.
Using Do-Not-Disturb (DND)
1. Press the DND button.
2. Do one of the following:
• Press (Up) or (Down) to scroll through the messages.
• Enter the two-digit number for the DND message.
3. Press # to select the message.
4. If applicable, enter the additional text for the DND description.
5. Press
(Speaker) or lift and replace the handset to save the setting.
Placing Conference Calls
1. While on the first call, press the Conf button to place the call on hold.
CALL NEXT PARTY TO CNF appears.
2. Place a call to the next conference party (for external calls, press the
Outgoing button or the Outgoing Call access code [8], and then dial the
number).
3. After the party answers, announce the conference, and then press the
Conf button to place the call on hold. Repeat this step as necessary to
add the remaining conference party.
4. Press the Conf button again. CNF IN PROGRESS appears.
NOTE
If your handset is off-hook when you view a station message,
you automatically place a call to the party who left the
message.