Mitel 5212 - Manual (Page 55)

Mitel ® Model 5212/5224 IP Endpoint User Guide for Inter-Tel ® 5000 Systems 37
Ca
ll
Fe
at
ures
Transferring a Conference
You can transfer an existing conference to another extension.
To transfer a conference:
1. During the conference, press (Transfer), and then dial the extension number.
2. Announce the conference (if desired), and then hang up. CONFERENCE TFR from
<name> appears on the called party’s display. The party must then press the
flashing Conf button to connect to the conference.
Dropping Out of a Conference
You can drop out of a conference and return to the conference later.
To drop out of a conference:
Press the Conf button or (Hold), and then hang up. ENTER EXTENSION
NUMBER appears. This removes you from the conference but leaves the other
parties connected.
To return to the conference:
Press the flashing Call button. CONFERENCE WAS HOLDING appears, and you
are reconnected to the conference.
Ending a Conference and Placing all Parties on Hold
You can end a conference and place all conference parties on Individual Hold, allowing you
to toggle between the held parties and speak to one party at a time.
To end a conference and place all parties on Individual Hold:
Press the Conf button, and then press (Hold). CONFERENCE PARTIES ON
HOLD appears.
To toggle between the held callers:
Press (Hold) twice for internal parties or the applicable Call button for external
parties.