Mitel 5212 - Manual (Page 4)

2
Answering Calls
Lift the handset, or press (Speaker) to answer a call while using a
headset or to answer a call in Handsfree Mode.
Answering Waiting Calls
Press the flashing IC or Call button. This places the first call on hold and
connects you to the waiting call.
Redirecting Calls
1. While a call is ringing, dial 331.
2. Enter the extension number, or press the Outgoing button or enter the
Outgoing Call access code (8), and then enter the external number. The
system sends the call to the specified number.
Placing Emergency Calls
When dialing an emergency number (911 U.S. or 999/112 Europe), you do not
have to press the Outgoing button or enter the Outgoing Call access code (8 is
the default code). The system automatically places emergency calls immediately
after you dial the number, even if you do not select an outside line.
Placing Internal (Intercom) Calls
With or without the handset lifted, dial the extension number. If you enter
incorrect digits, you can press
(Hold) to move the cursor backward,
deleting the last digits entered.
Placing External Calls
1. Press the Outgoing button, an unlit Call button, or enter the Outgoing
Call access code (8).
2. Dial the number.
Redialing an External Number
With or without the handset lifted, press (Redial).
NOTE
By default, internal (intercom) calls are assigned to the IC button,
and external calls are assigned to the Call buttons.
WARNING
Contact your system administrator and your local Inter-Tel provider for important
information about dialing emergency services before using your endpoint.