Mitel 5212 - Manual (Page 60)

42 Mitel ® Model 5212/5224 IP Endpoint User Guide for Inter-Tel ® 5000 Systems
Call
F
eatu
res
Using Remote Programming to Change DND Settings
See “Using Do-Not-Disturb (DND)” on page 46 for more information about using DND.
To use Remote Programming to turn on DND:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary,
enter your (DISA) password.
• Use any endpoint on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line
message text (if applicable).
To use Remote Programming to turn off DND:
Follow steps 1 through 4 above, and then dial 371.
Using Remote Programming to Forward Calls
See “Manual Call Forwarding” on page 35 for more information about Manual Call
Forwarding.
To use Remote Programming to turn on Manual Call Forwarding:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary,
enter your (DISA) password.
• Use any endpoint on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial one of the following Call Forwarding feature codes:
• 355 (All)
• 356 (No answer)
• 357 (Busy)
• 358 (No Answer/Busy)
6. Enter either an extension number or (8) followed by a telephone number.
To turn off Call Forwarding:
Dial 355, and then hang up.