Mitel 5212 - Manual (Page 41)

Mitel ® Model 5212/5224 IP Endpoint User Guide for Inter-Tel ® 5000 Systems 23
A
n
swerin
g an
d
Placing
C
alls
Placing External Calls
The following sections describe features used when placing external calls.
To place an external call:
1. Press the Outgoing button, an unlit Call button, or enter the Outgoing Call access
code (the default code is 8).
2. Dial the number.
Depending on system configuration, you may also be able to use one of the following
methods to select an outgoing line:
• Enter the Select Line Group (SLG) feature code. The default codes are 92001 to
92208.
• Enter the Automatic Route Selection (ARS) feature code. The default code is 92000.
Contact your system administrator for more information about using SLG or ARS access
codes.
Redialing a Number
You can quickly redial the last external number dialed. You cannot redial extension
numbers.
To use Redial:
With or without the handset lifted, press (Redial). The system automatically
selects a line and dials the number.
NOTES
If you cannot place an external call because all outgoing lines are busy,
you can request a callback, which prompts the system to contact you
when a line becomes available. See “Requesting a Callback (Queuing
the Endpoint)” on
page 22 .
If you are prompted for an account code (indicated by a single beep),
you must enter an account code before you can place your call. See
“Using Account Codes” on
page 29 .