Motorola Netopia 3342N User Manual
Page 94
Administrator’s Handbook
94
• Quality of Service (QoS) – This is the Quality of Service setting for the flow, based on the TOS bit
information. Select Expedite, Assure, or Off (default) from the pull-down menu. The following table out-
lines the TOS bit settings and behavior:
QoS Setting
TOS Bit Value
Behavior
Off
TOS=000
This custom flow is disabled. You can activate it by selecting one
of the two settings below. This setting allows you to pre-define
flows without actually activating them.
Assure
TOS=001
Use normal queuing and throughput rules, but do not drop pack-
ets if possible. Appropriate for applications with no guaranteed
deliver y mechanism.
Expedite
TOS=101
Use minimum delay. Appropriate for VoIP and video applications.
Network Control
TOS=111
Use highest possible priority.