Motorola Netopia 3342N - Manual (Page 22)

Administrator’s Handbook
22
Setting up the Motorola Netopia® Gateway
Refer to your Quickstar t Guide for instructions on how to connect your Motorola Netopia® gateway to your
power source, PC or local area network, and your Internet access point, whether it is a dedicated DSL outlet
or a DSL or cable modem. Different Motorola Netopia® Gateway models are supplied for any of these con-
nections. Be sure to enable Dynamic Addressing on your PC. Per form the following:
Microsoft Windows:
Step 1. Navigate to the TCP/IP Proper ties Control Panel.
a. Some Windows
versions follow a
path like this: Start menu -> Settings ->
Control Panel -> Network
(or Network and Dial-up
Connections -> Local Area
Connection -> Properties) -
> TCP/IP
[your_network_card] or
Internet Protocol [TCP/IP]
-> Properties
b. Some Windows
versions follow a
path like this: Start menu -> Con-
trol Panel -> Net-
work and Internet
Connections -> Net-
work Connections ->
Local Area Connec-
tion -> Properties ->
Internet Protocol
[TCP/IP] -> Proper-
ties