Motorola Netopia 3342N - Manual (Page 206)

Administrator’s Handbook
206
Factory Reset Switch
(not suppor ted on some models; 3342/3342N/3352/3352N models do not have a reset switch)
Lose your password? This section shows how to reset the Motorola Netopia® Gateway so that you can
access the configuration screens once again.
☛
NOTE: Keep in mind that all of your settings will need to be reconfigured.
If you don't have a password, the only way to access the Motorola Netopia® Gateway is the following:
1. Referring to the following diagram, find the round Reset Switch opening.
2. Carefully insert the point of a pen or an unwound paperclip into the opening.
• If you press the factor y default button for less than 1/2 a second, the unit will continue to run as nor-
mal.
• If you press the factor y default button for 1 second, when you release it, the Gateway will per form a fac-
tor y reset, clear all settings and configurations, and reboot. Do not hold the button down too long (5 –
10 seconds). This will destroy any saved default settings as well.
DSL POWER 4 3 ETHERNET 2 1
RESET
ON
OFF
Power Off / On LAN DSL 4 1 2 3
Factory Reset Switch:
3347W/3357W
1 Power 4 USB 3 Ethernet
2 DSL On / Off
Factory Reset Switch:
3341/3351
Power Off / On LAN
DSL
4 1 2 3
3346/3356
Factory Reset Switch:
2247NWG
2240N
2241N
2246N
Factory Reset Switch:
Push to clear all settings
Push to clear all settings
Push to clear all settings
Push to clear all settings
Factory Reset Switch:
Push to clear all settings
Factory Reset Switch: Push to clear all settings
2 3 Power
Off/On
LAN DSL
4 1
Factory Reset Switch:
MiaVo
Push to clear all settings