Link: internal servers, Internal servers – Motorola Netopia 3342N User Manual
Page 129
129
Link:
Internal Servers
Your Gateway ships with an embedded Web ser ver and suppor t for a Telnet session, to allow ease of use
for configuration and maintenance. The default por ts of
80 for HTTP and 23 for Telnet may be reassigned.
This is necessar y if a pinhole is created to suppor t applications using por t 80 or 23.
for more information on Pinhole configuration.
Web (HTTP) Server Port: To reassign the port number used to access the Motorola Netopia® embedded
Web ser ver, change this value to a value greater than 1024. When you next access the embedded Motorola
Netopia® Web ser ver, append the IP address with
http://
210.219.41.20:8080).
Telnet Server Port: To reassign the port number used to access your Motorola Netopia® embedded Telnet
ser ver, change this value to a value greater than 1024. When you next access the Motorola Netopia®
embedded Telnet ser ver, append the IP address with
telnet 210.219.41.20 2323).
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100 to access the web ser ver and
192.168.1.x:2323 to access the telnet ser ver. The value of 0 for an internal ser ver por t will disable that
ser ver. You can disable Telnet or Web, but not both. If you disabled both por ts, you would not be able to
reconfigure the unit without pressing the reset button.