Motorola Netopia 3342N User Manual
Page 51
51
☛
Note:
You need not use this screen if you have only a single Ethernet IP subnet.
This screen displays seven rows of editable columns. All seven row labels are always visible, regardless of
the number of subnets configured.
•
To add an IP subnet, select one of the rows, and click the
Edit
button.
Check the
Enabled checkbox and click the
Submit
button.
The screen expands to allow you to enter subnet information.
If
DHCP Server (see below) is not enabled, the DHCP Start Address and DHCP End Address fields do
not appear.
•
Enter the Router’s IP address on the subnet in the
IP Address field and the subnet mask for the subnet
in the
Netmask field.
•
Enter the
DHCP Start Address and End Address of the subnet range in their respective fields.
Ranges cannot overlap and there may be only one range per subnet.
•
Click the
Submit
button.
•
When you are finished adding subnets, click the
Alert icon at the upper right, and in the resulting page,
click the
Save and Restart
link.
To delete a configured subnet, set both the IP address and subnet mask values to 0.0.0.0, either explicitly
or by clearing each field and clicking the
Submit
button to commit the change.
☛
NOTE:
All additional DHCP ranges use the global lease period value. See
.