Motorola Netopia 3342N - Manual (Page 111)

111
• VLAN ID – If you select Global as the VLAN Type, the VLAN ID field appears for you to enter a VID. This
must be a unique identifying number between 1 and 4094. (A VID of zero (0) is permitted on the Ether-
net WAN por t only.)
• Admin Restricted – If you want to prevent administrative access to the Gateway from this VLAN, check
the checkbox.
• 802.1p Priority Bit: If you set this from the pull-down menu to a value greater than 0, all packets of this
VLAN with unmarked priority bits (pbits) will be re-marked to this priority.
Click the Submit button.
The VLAN Port Configuration screen appears.
• Por t inter faces available for this VLAN are listed in the left hand column.
• Displayed por t inter faces var y depending on the kinds of physical por ts on your Gateway, for example,
Ethernet, USB, and/or wireless.
Also, if you have multiple wireless SSIDs defined, these may be displayed as well (See Enable Multiple
Wireless IDs on page 59 )
• For Motorola Netopia® VGx technology models, separate Ethernet switch por ts are displayed and may
be configured.
To enable any of them on this VLAN, check the associated Enable checkbox(es).
Typically you will choose a physical por t, such as an Ethernet por t (example: eth0.1) or a wireless SSID
(example: ssid1).
• When you enable an inter face, the Tag, Priority, and Promote checkboxes and an 802.1p Priority Bit
pull-down menu appear for that inter face.