Motorola Netopia 3342N - Manual (Page 194)

Administrator’s Handbook
194
Status Indicator Lights
The first step in troubleshooting is to check the status indicator lights (LEDs) in the order outlined below.
Motorola Netopia® Gateway 2210 status indicator lights
LED Action
Power
Green when power is on. Red if device malfunctions. Flashes Red
when new embedded software is being installed.
Ethernet
Solid green when connected. Flash green when there is activity on
the LAN.
DSL
Solid green when trained. Blinking green when no line is attached or
when training.
Internet
Solid green when Broadband device is connected. Flashes green for
activity on the WAN por t. If the physical link comes up, but PPP or
DHCP fail, the LED turns
red .
Power Ethernet DSL Internet