MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 75)

71
Playback
Step
2 To pause playback, press the PAUSE button. (Still
image playback)
• To resume playback, press the PAUSE or PLAY
button.
• When you press a camera number button during still
image display in the single screen display mode,
the image from the camera corresponding to the
button you pressed is displayed. The clock showing
the recorded time may gain when you change the
camera number to be displayed during still frame
playback.
Tips
• Some images may appear shaking because this
recorder records images frame by frame, but this is not
a malfunction. To curb image shaking during playback,
select [Display a playback image in fi eld]. (
Page
112)
• When you press a camera number button during still
image playback in order to display images in the single
screen display mode, no images may be displayed
because of absence of recorded images from the
camera or the timing of still image display.
• In the field display mode, the odd images are
displayed.
Step
3 To stop playback, press the STOP button.
• When you start playback next time, playback
resumes from the point where it was stopped last
time.
Tips
• The playback speed of each camera may not be
constant depending on the recording conditions.
• In the split screen display mode, the playback rate
may be lower than the recording data.