MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 124)

120
Changing the lock mode from the
password lock to simple lock
Step
1 Disable the password locks for restricting
operation (Level 1 to Level 3).
Step
2 Clear the registered passwords for Level 1 to
Level 3.
Changing the operation restriction level
You can change the operations restricted in each level of
the password lock for restricting operations (Level 1 to Level
3).
Step
1 Press the SET UP button on the front panel of
the recorder or left-click the mouse.
or
•
Step
2 Select [Password].
Password
• The screen is displayed.
Step
3 Select [Setting] next to [Setting the lock level].
Setting
• The screen for setting the operation restriction level
is displayed.
Step
4 Select operations to be restricted using the or
button in each level.
• The default settings are as follows.
Operation restriction level Operations to be locked
Multiplexer /Sequence/E-zoom
Switching to the PTZ mode
Playback/Search/Bookmark menu display
Copy menu display
Warning reset/Self-check
REC/REC STOP/POWER button operation
Timer recording
Recorder information menu display
Setup menu display
Recording setting/Timer program setting/Data protect menu display
HDD registration/Data clear menu display
Password change/Operation restriction level setting
Simple lock
Level 2
Level 3
Level 1
Notice
• The operation control level of Level 3 cannot be set
higher than that of Level 2. The operation control level
of Level 2 cannot be set higher than that of Level 1.
• The Level 3 is applied to the recorder operations listed
below "Recorder information menu display" in the
table.
• You can switch the audio even while the level 1 lock is
enabled.
Restricting the operations of the recorder (continued)