beautypg.com

Viewing images captured by the cameras (continued) – MITSUBISHI ELECTRIC DX-TL5716U User Manual

Page 48

background image

44

Triplex playback

While displaying images captured by cameras, you can
view playback image of the desired camera.

Step

1 Press the TRIPLEX PB button during the split

screen display mode.

The triplex playback mode starts.

Step

2 Within 3 seconds after step 1, press the camera

number button corresponding to the camera of
which playback image you want to view.

The image and audio of the selected camera are

played back. The image being played back is
marked by a green frame.

With the playback images, you can perform shuttle

viewing and frame-by-frame playback. (

page 77)

To change the camera for triplex playback, stop

playback and then follow steps 1 and 2 above.

Step

3 Press the STOP button to stop playback.

Notice

Triplex playback can be used with Output A only.

When no camera number button is pressed for 3
seconds or longer after the TRIPLEX PB button is
pressed, the triplex playback mode is canceled.

You cannot display the playback image of the camera
of which image is not displayed on the split screen. In
this case, follow the above procedures again as the
triplex playback mode is canceled.

When you press any button other than the camera
number buttons after the triplex playback mode starts,
follow the above procedures again as the triplex
playback mode is canceled.

When you display a different type of split screen
during the triplex playback, the triplex playback mode
is canceled. (When the image captured by the camera
being selected for triplex playback is displayed on
a newly displayed split screen, the triplex playback
continues even when you change the split screen.)

When the alarm display function is active, you cannot
use the triplex playback mode. When the alarm display
function becomes active during triplex playback, the
triplex playback is canceled and the normal camera
images are displayed after the completion of the alarm
display.

When the data being played don’t contain images
captured by the selected camera, the screen turns to
black. In this case, the green frame does not appear.

During triplex playback, the clock displayed on the
screen shows the date and time when the data being
played were recorded.

Viewing images captured by the cameras (continued)