Error indications (continued) – MITSUBISHI ELECTRIC DX-TL5716U User Manual

Page 140

136

Error indications (continued)

Call-out

signal

output*1

Page

80-83

113

Display

Remedy

Code

Cause

LOG3500*5

LOG7500*6

LOG3600*5

LOG7600*6

LOG3707*5

LOG7707*6

LOG3708

LOG3705

LOG3706

None

Normal

Copy stopped because the copy source
data were overwritten.
Archive stopped because the copy source
data were overwritten.

Copy source data are about to be
overwritten.
Stop recording if you want to continue
copying.
Archive source data are about to be
overwritten.
Stop recording if you want to continue
archive.
Copy HDD error

Cannot copy the data.
Check the copy destination HDD.
Archive HDD error

Cannot archive the data.
Check the archive destination HDD.
DVD/CD drive was not found.
Not connected or unusable.

Connect a proper DVD/CD drive.
No USB memory was found.
No USB memory or unusable memory is
inserted. Use proper USB memory and
connect it correctly.
Menu data cannot be read out.

· The data being copied

or archived are
overwritten.

· The data being copied

or archived are about to
be overwritten.

· The copy/archive

destination HDD is not
found.

· There is no free space

left in the copy/archive
destination HDD.

· The DVD/CD drive is not

connected yet or a drive
of wrong type is
connected.

· No USB memory is

inserted for copying or a
USB memory of wrong
type is inserted.

· The menu data cannot

be read out.

· To continue copying/archiving, stop

recording.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
information screen to clear the warning.

· To continue copying/archiving, stop

recording.

· To continue recording, stop

copying/archiving.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
information screen to clear the warning.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
information screen to clear the warning.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
information screen to clear the warning.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
information screen to clear the warning.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
information screen to clear the warning.

Warning

level*2

Call-out

signal

output*1

Page

105

40, 105

105

Display

Remedy

Code

Cause

LOG1200

LOG1201

LOG1202

LOG7200

LOG1100*4

LOG1101*4
LOG1102

LOG3100
LOG7100

LOG56 *8

LOG57 *8

LOG6500

Selectable

None

Selectable

Normal

Minor

Remaining capacity of HDD (Normal) is
running short.
Remain **%*3
Remaining capacity of HDD (Alarm) is
running short.
Remain **%*3
Remaining capacity of HDD (EMR) is
running short.
Remain **%*3
Remaining capacity of HDD (Archive) is
running short.
Remain **%*3
Remaining capacity of HDD (Normal) is
0%.
Remaining capacity of HDD (Alarm) is 0%.
Remaining capacity of HDD (EMR) is 0%.

Remaining capacity of HDD (Copy) is 0%.
Remaining capacity of HDD (Archive) is
0%.

Recorder skipped the defect area and
resumed recording.
Recorder resumed recording to the next
HDD.
Error was found in the external HDD.
Check the HDD system configuration.

· The remaining capacity

of the HDD reaches the
value set by [Call-out].

· The free space in the

HDD runs out with
[Call-out] set to 0%. (It is
not output when the repeat
recording is enabled.)

· The free space in the

copy or archive device
runs out.

· A temporary failure or

malfunction occurs in the
HDD.

· The external HDD is

reset.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
warning indication to clear the warning.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
warning indication to clear the warning.

· When the warning is cleared, the recorder

overwrites data from the oldest.

· Press the WARNING RESET button on the

front panel or click the [X] button on the
warning indication to clear the warning.

· Replace the medium with a new one.
· Check whether the HDD has no

malfunction.

· Check whether the HDD has no

malfunction.

· Turn off the power of the recorder and then

turn it back on.

· Check the connection.

Warning

level*2

(continued)