MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 138)

134
When an error occurs in the recorder, it indicates the error by 2 methods as described below.
• Information .................When an error occurs, "Please push the [HELP] button" is displayed on the screen. When you press
the HELP button, the information screen is displayed.
To clear the information screen, press the HELP/WARNING RESET button on the front panel of the
recorder or the [X] button on the information screen.
• Warning ......................When an error occurs, "Please push the [HELP] button" is displayed on the screen. When you press
the HELP button, the details of the error are displayed.
The recorder outputs a call-out signal or sounds a buzzer depending on the warning event.
(
Pages 105 and 106)
To clear the indication, press the HELP/WARNING RESET button on the front panel of the recorder
or the [X] button on the warning indication. When you clear the warning indication, the buzzer and
the call-out signal output stop.
Error occurs.
HELP button on the front panel
or X button on the screen
"Please push the [HELP] button" is displayed. ALERT indicator on the front panel of the recorder blinks.
Close the menus.
When the menu is displayed When the menu is not displayed
Warning/Information is displayed.
Warning/Information is cleared.
HELP button on the front panel HELP button on the front panel
Warning indication and call-out signal output
Tips
• The recorder retains and displays the past 16 information/warning events. The older events are cleared and the call-out
signal output is canceled.
• When an operation error involving reboot of the recorder such as LOG14 occurs while the call-out output is enabled,
a call-out signal is output from the CALL OUT terminal. After that, the recorder prepares for reboot and the call-out
signal output ceases. However, the call-out signal is output again after the recorder reboots (LOG5100). In this case,
the call-out signal output stops when you clear the warning indication.
Recording operation error
(LOG14 ) occurs.
Prepare
for reboot.
Warning
cleared.
Execute reboot.
LOG5100
Call-out signal output
No call-out signal output
Error indications