beautypg.com

Recording (continued), Motion detection settings – MITSUBISHI ELECTRIC DX-TL5716U User Manual

Page 66

background image

62

Motion detection settings

Based on the motion detection conditions, the recorder
starts alarm recording when it detects variation in motion in
the image captured by the connected camera. You can set
2 patterns of motion detection conditions. (MD-A/MD-B)

Alarm recording
starts.

Alarm recording
starts.

Variation in motion

is detected.

Step

1 Press the SET UP button on the front panel of

the recorder or left-click the mouse.

or

is displayed.

Step

2 Select [Recording setting].

Recording setting

The screen is displayed.

Step

3 Select [Setting] next to [Manual setting].

Setting

The screen is displayed.

Step

4 Select [Setting] next to [Motion detection].

Setting

The screen is displayed.

Step

5 Select a camera used for motion detection in

[Camera selection].

1

You can make motion detection settings for each

camera.

Notice

The motion detection function does not work while the
Motion detection setting screen is displayed.

Step

6 Set the detection sensitivity to variation in the

loaded image.

High

The detection sensitivity has 5 levels according to

the variation in brightness.

Tips

When the sensitivity is set to [High], the motion
detection function may detect even flickering of the
fl uorescent light, etc.

Step

7 Set the motion detection threshold.

0 0 5

Set the motion detection threshold (or the minimum

number of cells to the number of active cells in the
detection area) for starting the motion detection
operation.

The motion detection function activates when it

detects variation exceeding the threshold.

Notice

You can set the number of active cells in the detection
area at the maximum in [MD threshold]. When you set
a value exceeding that number, it turns to red. In this
case, decrease the value.

Step

8 Set the detection interval.

0.5sec

You can select the detection interval. By setting

the detection interval, the motion detection detects
objects that move fast and slowly separately. For
effective detection, set the interval long for objects
that move slowly and set it short for objects that
move fast.

Step

9 Set the detection area.

When you select [Setting] next to [Mask set], the

screen for setting the detection area is displayed.

Setting

[All area]: The setting screen is displayed with all
the cells in the detection area set active.

[No area]: The setting screen is displayed with all
the cells in the detection area set inactive.

[User A], [User B]: The setting screen is displayed
with the current detection area setting maintained.

[Copy Setting B], [Copy Setting A]: The setting
screen is displayed with the detection area setting of
the other pattern. The settings made in this step are
saved as [User A] or [User B].

Display the desired setting pattern and select

[Execute]. The setting screen is displayed.

You can set any of 418 cells in the detection area.

Active cells are indicated in red, inactive cells are

indicated in blue, and cells being set are colorless.

Recording (continued)