MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 128)

124
Checking the registered devices and
recorded data area
Displaying the
screen
Step
1 Press the SET UP button on the front panel of
the recorder or left-click the mouse.
or
•
Step
2 Select [Information].
Information
• The screen is displayed.
Step
3 Select [Confi rm] next to [Device information] on
the screen.
Confirm
• The screen is displayed.
Displaying the Main device information
Step
1 Display the screen
according to steps 1 to 3 of "Displaying the
screen" above.
Step
2 Select [Confirm] next to [Information of Main
device].
Confirm
• Information such as the recording start and end
dates and times, size (%), and remaining capacity of
each area is displayed.
Notice
• Only areas created by the partition setting ( page
41) are displayed.
Step
3 Select [Next] to display the detailed information
of each HDD.
D:Next
• Information such as the device connection name,
manufacturer, device name and size (GB) of each
HDD is displayed.
• This procedure cannot be carried out when there is
no internal HDD in the recorder.
[Detail]: The recording start and end times of the
selected HDD are displayed.
Notice
• Before displaying the latest information, check that the
devices are correctly confi gured while the recorder is
stopped. (
Page 39)
Displaying the Copy device information
Step
1 Display the screen
according to steps 1 to 3 of "Displaying the
screen" above.
Step
2 Select [Confirm] next to [Information of Copy
device].
Confirm
• Information such as the recording start and end
times, size (MB/GB), and remaining capacity of each
device is displayed.
Step
3 Select [Next] to display the detailed information
of each device.
D:Next
• Information such as the device connection name,
manufacturer, device name, and operating time is
displayed.
• This procedure cannot be carried out when there is
no device which is registered as the Copy device.
Displaying the Archive device
information
Step
1 Display the screen
according to steps 1 to 3 of "Displaying the
screen" above.
Step
2 Select [Confi rm] next to [Information of Archive
device].
Confirm
• Information such as the recording start and
end times, size (GB), and remaining capacity is
displayed.
Step
3 Select [Next] to display the detailed information.
D:Next
• Information such as the device connection name,
manufacturer, device name and size (GB) of each
device is displayed.
• This procedure cannot be carried out when there is
no HDD which is registered as the Archive device.
[Detail]: The recording start and end times of the
selected HDD are displayed.
Displaying the device information