MITSUBISHI ELECTRIC DX-TL5716U - Manual (Page 123)

119
Others
Notice
• With the password locks for Levels 1 to 3 enabled,
when you disable the lock for Level 1 only, the lock for
Level 2 remains enabled. When the locks for Level 1
and Level 2 are disabled, the lock for Level 3 becomes
enabled.
• When the password locks are enabled for Level 1 and
Level 2, you cannot disable only the lock for Level 2.
Disable the lock from Level 1.
• Be sure to enter the passwords correctly. If you
enter an incorrect password, the password already
entered is canceled and you are required to enter the
password again.
• When you want to cancel the unlocking procedure,
select [Return] on the screen. The screen for unlocking
automatically disappears when no buttons are pressed
for 1 minute.
Password lock for HDD protection
Step
1 Select [Clear] of the desired area in the Main
device of ( page 122).
Or, select [Setting] of [Delete data from the list]
of (
page 121).
• is displayed.
Step
2 Press the number buttons to enter the password
for HDD protection.
• When you close the or
screen, the password lock for HDD protection
becomes enabled.
Tips
• If you forget the password, contact your dealer.
• Each time you execute the data deletion, Password for HDD protection> is displayed and you
are required to input the password.
Changing a password
Password for restricting operations (Levels 1 to 3)
Step
1 Disable the password locks for Level 1 to Level 3.
Step
2 Press the SET UP button on the front panel of
the recorder or left-click the mouse.
or
•
Step
3 Select [Password].
Password
• The screen is displayed.
Step
4 Select [Setting] of the level of which password
you want to change.
• The screen for setting a password for the selected
level is displayed.
Step
5 Select [Clear].
• The registered password is cleared.
Step
6 Enter a new password according to steps 4 and
5 of "Registering a password."
Password for HDD protection
Step
1 Press the SET UP button on the front panel of
the recorder or left-click the mouse.
or
•
Step
2 Select [Password].
Password
• The screen is displayed.
Step
3 Select [Setting] next to [Password for HDD
protection].
• The screen for setting the password lock for HDD
protection is displayed.
Step
4 Select [Clear].
Step
5 Press the number buttons to enter the password.
• The registered password is cleared.
Step
6 Enter a new password according to steps 4 and
5 of "Registering a password."