beautypg.com

MITSUBISHI ELECTRIC DX-TL5716U User Manual

Page 61

background image

57

Recording

Notice

When the total FPS of all the recordings being
performed is around the following values, they may not
be performed according to the specifi ed settings.

When the total FPS is around the following values, you
cannot view images from the inactive cameras via the
network.

When the picture size is set to [4CIF] ........120 FPS
When the picture size is set to [2CIF] ........240 FPS
When the picture size is set to [CIF] ..........480 FPS

Tips

time>

[Estimated time] is displayed at the bottom of the

screen, which shows the maximum continuous
recording time at the picture quality and FPS for
normal recording.

When you change the capacity of the normal

recording area in the partition setting, the estimated
time is displayed according to the specifi ed capacity.

The estimated time is just for a guide. Depending

on the recorded images, the actual recording time
may vary considerably. As more motion images are
recorded, the actual recording time may become
shorter than the estimated time.

When the sum of each FPS is around the following
values, [Total FPS] is displayed in red and an error
message appears. In this case, decrease the FPS.

When the picture size is set to [4CIF] ........120 FPS
When the picture size is set to [2CIF] ........240 FPS
When the picture size is set to [CIF] ..........480 FPS

[Total FPS] shows the sum of the larger values
between the FPS for normal recording and that for
alarm recording of the selected cameras. (The value
displayed in [Total FPS] is not same as the sum of the
displayed FPS.)

Alarm camera setting

Step

10 Select recording cameras for each connected

sensor.

Alarm recording is performed with selected cameras.

When an alarm signal is input during normal

recording, images from cameras selected for alarm
recording are recorded at the alarm recording
FPS rate while images from the other cameras are
recorded at the normal recording FPS rate. The
maximum total of the alarm recording FPS and
normal recording FPS of the selected cameras is as
follows.

When the picture size is set to [4CIF] ...... 120 FPS

When the picture size is set to [2CIF] .......240 FPS
When the picture size is set to [CIF] .........480 FPS

Alarm input to 3ch

Alarm input to 5ch

1ch

2ch

3ch

4ch

5ch

6ch

Alarm recording

Alarm recording

Nomal recording
Nomal recording
Nomal recording

Nomal recording

Nomal recording

Nomal recording
Nomal recording
Nomal recording

When the setting is completed, select [Next]. The

screen is displayed.

Tips

You can select multiple cameras per sensor input.