beautypg.com

Recording (continued) – MITSUBISHI ELECTRIC DX-TL5716U User Manual

Page 72

background image

68

Notice

When you set holidays using the holiday setting
screen and select [Holiday] in the [Day] column, that
program always takes priority.

When the timer recording is performed on the external
HDD, the recording time may become several seconds
shorter than the designated time.

When alarm recording starts during timer recording,
the alarm recording continues even when the timer
recording end time comes. The timer recording ends
when the alarm recording ends.

When alarm or emergency recording starts during
timer recording, the alarm or emergency recording
continues for the specifi ed recording time even if the
start time of the next timer program comes. After the
completion of the alarm or emergency recording, the
next coming timer program starts.

Example 1

Example 2

Example 3

Program 1

Alarm recording

Timer program
setting

Emergency recording

Alarm recording

Emergency recording

Alarm recording

Emergency recording

Skip or Off

Program 2

Extended

Extended

End of Program 1

End of Program 1

End of Program 1

Program 1

Timer program
setting

Program 2

Extended

Extended

Shift to Program 2

Program 1

Timer program
setting

Program 3

Program 2

Extended

Extended

Shift to Program 3

Recording is not performed correctly if there is an error in the settings. To prevent such errors, this recorder notifi es
the user of errors using following methods. If there is an error in the settings, take necessary procedures.

Recorder status

Description of error

Countermeasure

Page

The TIMER indicator
blinks. (The series of
short beeps sounds.)

1) The timer program has not been

set.

1) Set the timer program.

66-68

The TIMER button does
not work.

1) A menu is being displayed.
2) Program setting is underway.

• Close

the

menus.

-

Timer recording does not
start when the program
start time comes.

1) HDD space runs out when the

repeat recording is disabled.

2) Clock is not correct.
3) Program settings are not correct.

• Clear the warning indication.
• Enable the repeat recording.
• Set the clock correctly.
• Check the settings on the confi rmation

screen.

134

40

105

66,67

Recording (continued)