Standard message stamp – Microsoft 2045 User Manual

Page 70

Other Transmission Features

Standard Message Stamp

Use this function to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: “Confidential”, “Urgent”,
“Please phone”, and “Copy to corres.
section”
You can also program other messag-
es.

Note

❒ While this function is in use, the

third line of the Label Insertion is
not printed. See p.70 “Program-
ming the Label Insertion”.

❒ When there is an image around the

area where the standard message
is to be stamped, that image is de-
leted.

❒ To program a standard message,

use the Program/Change/Delete
Standard Message function. See
p.137 “Programming, Changing,
and Deleting Standard Messages”.

AAAA

Place the originals, and the select
the scan settings you require.

Reference

p.11 “Placing Originals”, Fac-
simile Reference
p.27 “Scan Settings”, Facsimile
Reference

BBBB

Press [Sub TX Mode].

CCCC

Select [Std. Message].

DDDD

Select the standard message to be
stamped, and then press [OK].

The selected standard message is
shown above the highlighted [Std.
Message]

Note

❒ To cancel the selection, press

[Cancel]

. The display returns to

that of step

❒ Programmed standard messag-

es are shown in the keys.

❒ The machine cannot stamp mul-

tiple standard messages.

EEEE

Press [OK].

FFFF

Dial, and then press the

{{{{Start}}}}

key.